#top find¶

Measure times (for -amin, -atime, -cmin, -ctime, -mmin, and -mtime) from the beginning of today rather than from 24 hours ago. This option only affects tests which appear later on the command line.

Process each directory’s contents before the directory itself.

A synonym for -depth, for compatibility with FreeBSD, NetBSD, MacOS X and OpenBSD.

Deprecated; use the -L option instead. Dereference symbolic links. Implies -noleaf. The -follow option affects only those tests which appear after it on the command line. Unless the -H or -L option has been specified, the position of the -follow option changes the behaviour of the -newer predicate; any files listed as the argument of -newer will be dereferenced if they are symbolic links. The same consideration applies to -anewer and -cnewer. Similarly, the -type predicate will always match against the type of the file that a symbolic link points to rather than the link itself. Using -follow causes the -lname and -ilname predicates always to return false.

Print a summary of the command-line usage of find and exit.

Normally, find will emit an error message when it fails to stat a file. If you give this option and a file is deleted between the time find reads the name of the file from the directory and the time it tries to stat the file, no error message will be issued. This also applies to files or directories whose names are given on the command line. This option takes effect at the time the command line is read, which means that you cannot search one part of the filesystem with this option on and part of it with this option off (if you need to do that, you will need to issue two find commands instead, one with the option and one without it).

Descend at most levels (a non-negative integer) levels of directories below the command line arguments. '-maxdepth 0' means only apply the tests and actions to the command line arguments.

Do not apply any tests or actions at levels less than levels (a non-negative integer). '-mindepth 1' means process all files except the command line arguments.

Don't descend directories on other filesystems. An alternate name for -xdev, for compatibility with some other versions of find.

Turns off the effect of -ignore_readdir_race.

Do not optimize by assuming that directories contain 2 fewer subdirectories than their hard link count. This option is needed when searching filesystems that do not follow the Unix directory-link convention, such as CD-ROM or MS-DOS filesystems or AFS volume mount points. Each directory on a normal Unix filesystem has at least 2 hard links: its name and its '.' entry. Additionally, its subdirectories (if any) each have a '..' entry linked to that directory. When find is examining a directory, after it has statted 2 fewer subdirectories than the directory’s link count, it knows that the rest of the entries in the directory are non-directories ('leaf' files in the directory tree). If only the files' names need to be examined, there is no need to stat them; this gives a significant increase in search speed.

Changes the regular expression syntax understood by -regex and -iregex tests which occur later on the command line. Currently-implemented types are emacs (this is the default), posix-awk, posix-basic, posix-egrep and posix-extended.

Print the find version number and exit.

Turn warning messages on or off. These warnings apply only to the command line usage, not to any conditions that find might encounter when it searches directories. The default behaviour corresponds to -warn if standard input is a tty, and to -nowarn otherwise.

Don't descend directories on other filesystems.

for greater than n,

for less than n,

for exactly n.

File was last accessed n minutes ago.

File was last accessed more recently than file was modified. If file is a symbolic link and the -H option or the -L option is in effect, the access time of the file it points to is always used.

File was last accessed n*24 hours ago. When find figures out how many 24-hour periods ago the file was last accessed, any fractional part is ignored, so to match -atime +1, a file has to have been accessed at least two days ago.

File's status was last changed n minutes ago.

File's status was last changed more recently than file was modified. If file is a symbolic link and the -H option or the -L option is in effect, the status-change time of the file it points to is always used.

File's status was last changed n*24 hours ago. See the comments for -atime to understand how rounding affects the interpretation of file status change times.

File is empty and is either a regular file or a directory.

Always false.

File is on a filesystem of type type. The valid filesystem types vary among different versions of Unix; an incomplete list of filesystem types that are accepted on some version of Unix or another is: ufs, 4.2, 4.3, nfs, tmp, mfs, S51K, S52K. You can use -printf with the %F directive to see the types of your filesystems.

File's numeric group ID is n.

File belongs to group gname (numeric group ID allowed).

Like -lname, but the match is case insensitive. If the -L option or the -follow option is in effect, this test returns false unless the symbolic link is broken.

Like -name, but the match is case insensitive. For example, the patterns 'fo*' and 'F??' match the file names 'Foo', 'FOO', 'foo', 'fOo', etc. In these patterns, unlike filename expansion by the shell, an initial '.' can be matched by '*'. That is, find -name *bar will match the file '.foobar'. Please note that you should quote patterns as a matter of course, otherwise the shell will expand any wildcard characters in them.

File has inode number n. It is normally easier to use the -samefile test instead.

Behaves in the same way as -iwholename. This option is depre- cated, so please do not use it.

Like -regex, but the match is case insensitive.

Like -wholename, but the match is case insensitive.

File has n links.

File is a symbolic link whose contents match shell pattern pattern. The metacharacters do not treat '/' or '.' specially. If the -L option or the -follow option is in effect, this test returns false unless the symbolic link is broken.

File's data was last modified n minutes ago.

File's data was last modified n*24 hours ago. See the comments for -atime to understand how rounding affects the interpretation of file modification times.

Base of file name (the path with the leading directories removed) matches shell pattern pattern. The metacharacters ('*', '?', and '[]') match a '.' at the start of the base name (this is a change in findutils-4.2.2; see section STANDARDS CON- FORMANCE below). To ignore a directory and the files under it, use -prune; see an example in the description of -wholename. Braces are not recognised as being special, despite the fact that some shells including Bash imbue braces with a special meaning in shell patterns. The filename matching is performed with the use of the fnmatch(3) library function. Don't forget to enclose the pattern in quotes in order to protect it from expansion by the shell.

File was modified more recently than file. If file is a symbolic link and the -H option or the -L option is in effect, the modification time of the file it points to is always used.

No user corresponds to file’s numeric user ID.

No group corresponds to file’s numeric group ID.

See -wholename. The predicate -path is also supported by HP-UX
find.

File's permission bits are exactly mode (octal or symbolic). Since an exact match is required, if you want to use this form for symbolic modes, you may have to specify a rather complex mode string. For example '-perm g=w' will only match files which have mode 0020 (that is, ones for which group write permission is the only permission set). It is more likely that you will want to use the '/' or '-' forms, for example '-perm -g=w', which matches any file with group write permission. See the EXAMPLES section for some illustrative examples.

All of the permission bits mode are set for the file. Symbolic modes are accepted in this form, and this is usually the way in which would want to use them. You must specify 'u', 'g' or 'o' if you use a symbolic mode. See the EXAMPLES section for some illustrative examples.

Any of the permission bits mode are set for the file. Symbolic modes are accepted in this form. You must specify 'u', 'g' or 'o' if you use a symbolic mode. See the EXAMPLES section for some illustrative examples. If no permission bits in mode are set, this test currently matches no files. However, it will soon be changed to match any file (the idea is to be more consistent with the behaviour of perm -000).

Deprecated, old way of searching for files with any of the permission bits in mode set. You should use -perm /mode instead. Trying to use the '+' syntax with symbolic modes will yield surprising results. For example, '+u+x' is a valid symbolic mode (equivalent to +u,+x, i.e. 0111) and will therefore not be evaluated as -perm +mode but instead as the exact mode specifier -perm mode and so it matches files with exact permissions 0111 instead of files with any execute bit set. If you found this paragraph confusing, you're not alone - just use -perm /mode. This form of the -perm test is deprecated because the POSIX specification requires the interpretation of a leading '+' as being part of a symbolic mode, and so we switched to using '/' instead.

File name matches regular expression pattern. This is a match on the whole path, not a search. For example, to match a file named './fubar3', you can use the regular expression '.*bar.' or '.*b.*3', but not 'f.*r3'. The regular expressions understood by find are by default Emacs Regular Expressions, but this can be changed with the -regextype option.

File refers to the same inode as name. When -L is in effect, this can include symbolic links.

File uses n units of space. The following suffixes can be used:

'b' for 512-byte blocks (this is the default if no suffix is used)
'c' for bytes
'w' for two-byte words
'k' for Kilobytes (units of 1024 bytes)
'M' for Megabytes (units of 1048576 bytes)
'G' for Gigabytes (units of 1073741824 bytes)

The size does not count indirect blocks, but it does count blocks in sparse files that are not actually allocated. Bear in mind that the '%k' and '%b' format specifiers of -printf handle sparse files differently. The 'b' suffix always denotes 512-byte blocks and never 1 Kilobyte blocks, which is different to the behaviour of -ls.

Always true.

File is of type c:

b block (buffered) special
c character (unbuffered) special
d directory
p named pipe (FIFO)
f regular file
l symbolic link; this is never true if the -L option or the -follow option is in effect, unless the symbolic link is broken. If you want to search for symbolic links when -L is in effect, use -xtype.
s socket
D door (Solaris)

File's numeric user ID is n.

File was last accessed n days after its status was last changed.

File is owned by user uname (numeric user ID allowed).

File name matches shell pattern pattern. The metacharacters do not treat '/' or '.' specially; so, for example,
find . -wholename './sr*sc'
will print an entry for a directory called './src/misc' (if one exists). To ignore a whole directory tree, use -prune rather than checking every file in the tree. For example, to skip the directory 'src/emacs' and all files and directories under it, and print the names of the other files found, do something like this:
find . -wholename './src/emacs' -prune -o -print

The same as -type unless the file is a symbolic link. For symbolic links: if the -H or -P option was specified, true if the file is a link to a file of type c; if the -L option has been given, true if c is ‘l’. In other words, for symbolic links, -xtype checks the type of the file that -type does not check.

(SELinux only) Security context of the file matches glob pattern.

Delete files; true if removal succeeded. If the removal failed, an error message is issued. Use of this action automatically turns on the '-depth' option.

Execute command; true if 0 status is returned. All following arguments to find are taken to be arguments to the command until an argument consisting of ';' is encountered. The string '{}' is replaced by the current file name being processed everywhere it occurs in the arguments to the command, not just in arguments where it is alone, as in some versions of find. Both of these constructions might need to be escaped (with a '\') or quoted to protect them from expansion by the shell. See the EXAMPLES section for examples of the use of the '-exec' option. The specified command is run once for each matched file. The command is executed in the starting directory. There are unavoidable security problems surrounding use of the -exec option; you should use the -execdir option instead.

This variant of the -exec option runs the specified command on the selected files, but the command line is built by appending each selected file name at the end; the total number of invocations of the command will be much less than the number of matched files. The command line is built in much the same way that xargs builds its command lines. Only one instance of '{}' is allowed within the command. The command is executed in the starting directory.

Like -exec, but the specified command is run from the subdirectory containing the matched file, which is not normally the directory in which you started find. This a much more secure method for invoking commands, as it avoids race conditions during resolution of the paths to the matched files. As with the -exec option, the ’+’ form of -execdir will build a command line to process more than one matched file, but any given invocation of command will only list files that exist in the same subdirectory. If you use this option, you must ensure that your $PATH environment variable does not reference the current directory; otherwise, an attacker can run any commands they like by leaving an appropriately-named file in a directory in which you will run -execdir.

True; like -ls but write to file like -fprint. The output file is always created, even if the predicate is never matched. See the UNUSUAL FILENAMES section for information about how unusual characters in filenames are handled.

True; print the full file name into file file. If file does not exist when find is run, it is created; if it does exist, it is truncated. The file names "/dev/stdout" and "/dev/stderr" are handled specially; they refer to the standard output and standard error output, respectively. The output file is always created, even if the predicate is never matched. See the UNUSUAL FILENAMES section for information about how unusual characters in filenames are handled.

True; like -print0 but write to file like -fprint. The output file is always created, even if the predicate is never matched. See the UNUSUAL FILENAMES section for information about how unusual characters in filenames are handled.

True; like -printf but write to file like -fprint. The output file is always created, even if the predicate is never matched. See the UNUSUAL FILENAMES section for information about how unusual characters in filenames are handled.

Like -exec but ask the user first (on the standard input); if the response does not start with 'y' or 'Y', do not run the command, and return false. If the command is run, its standard input is redirected from /dev/null.

print the full file name on the standard output, followed by a newline. If you are piping the output of find into another program and there is the faintest possibility that the files which you are searching for might contain a newline, then you should seriously consider using the '-print0' option instead of '-print'. See the UNUSUAL FILENAMES section for information about how unusual characters in filenames are handled.

Like -execdir but ask the user first (on the standard input); if the response does not start with 'y' or 'Y', do not run the command, and return false. If the command is run, its standard input is redirected from /dev/null.

True; print the full file name on the standard output, followed by a null character (instead of the newline character that '-print' uses). This allows file names that contain newlines or other types of white space to be correctly interpreted by programs that process the find output. This option corresponds to the '-0' option of xargs.

True; print format on the standard output, interpreting '\' escapes and '%' directives. Field widths and precisions can be specified as with the 'printf' C function. Please note that many of the fields are printed as %s rather than %d, and this may mean that flags don't work as you might expect. This also means that the '-' flag does work (it forces fields to be leftaligned). Unlike -print, -printf does not add a newline at the end of the string. The escapes and directives are:

\a Alarm bell.
\b Backspace.
\c Stop printing from this format immediately and flush the output.
\f Form feed.
\n Newline.
\r Carriage return.
\t Horizontal tab.
\v Vertical tab.
\ ASCII NUL.
\\ A literal backslash ('\').
\NNN The character whose ASCII code is NNN (octal).
A '\' character followed by any other character is treated as an ordinary character, so they both are printed.
%% A literal percent sign.
%a File's last access time in the format returned by the C 'ctime' function.
%Ak File's last access time in the format specified by k, which is either '@' or a directive for the C 'strftime' function. The possible values for k are listed below; some of them might not be available on all systems, due to differences in 'strftime' between systems.
@ seconds since Jan. 1, 1970, 00:00 GMT.

Time fields:
H hour (00..23)
I hour (01..12)
k hour ( 0..23)
l hour ( 1..12)
M minute (00..59)
p locale’s AM or PM
r time, 12-hour (hh:mm:ss [AP]M)
S second (00..61)
T time, 24-hour (hh:mm:ss)
+ Date and time, separated by '+', for example '2004-04-28+22:22:05'. The time is given in the current timezone (which may be affected by setting the TZ environment variable). This is a GNU extension.
X locale's time representation (H:M:S)
Z time zone (e.g., EDT), or nothing if no time zone is determinable

Date fields:
a locale's abbreviated weekday name (Sun..Sat)
A locale's full weekday name, variable length (Sunday..Saturday)
b locale's abbreviated month name (Jan..Dec)
B locale's full month name, variable length (January..December)
c locale's date and time (Sat Nov 04 12:02:33 EST 1989)
d day of month (01..31)
D date (mm/dd/yy)
h same as b
j day of year (001..366)
m month (01..12)
U week number of year with Sunday as first day of week (00..53)
w day of week (0..6)
W week number of year with Monday as first day of week (00..53)
x locale's date representation (mm/dd/yy)
y last two digits of year (00..99)
Y year (1970...)
%b The amount of disk space used for this file in 512-byte blocks. Since disk space is allocated in multiples of the filesystem block size this is usually greater than %s/1024, but it can also be smaller if the file is a sparse file.
%c File's last status change time in the format returned by the C 'ctime' function.
%Ck File's last status change time in the format specified by k, which is the same as for %A.
%d File's depth in the directory tree; 0 means the file is a command line argument.
%D The device number on which the file exists (the st_dev field of struct stat), in decimal.
%f File's name with any leading directories removed (only the last element).
%F Type of the filesystem the file is on; this value can be used for -fstype.
%g File's group name, or numeric group ID if the group has no name.
%G File's numeric group ID.
%h Leading directories of file's name (all but the last element). If the file name contains no slashes (since it is in the current directory) the %h specifier expands to ".".
%H Command line argument under which file was found.
%i File's inode number (in decimal).
%k The amount of disk space used for this file in 1K blocks. Since disk space is allocated in multiples of the filesystem block size this is usually greater than %s/1024, but it can also be smaller if the file is a sparse file.
%l Object of symbolic link (empty string if file is not a symbolic link).
%m File's permission bits (in octal). This option uses the 'traditional' numbers which most Unix implementations use, but if your particular implementation uses an unusual ordering of octal permissions bits, you will see a difference between the actual value of the file's mode and the output of %m. Normally you will want to have a leading zero on this number, and to do this, you should use the # flag (as in, for example, '%#m').
%M File's permissions (in symbolic form, as for ls). This directive is supported in findutils 4.2.5 and later.
%n Number of hard links to file.
%p File's name.
%P File's name with the name of the command line argument under which it was found removed.
%s File's size in bytes.
%t File's last modification time in the format returned by the C 'ctime' function.
%Tk File's last modification time in the format specified by k, which is the same as for %A.
%u File's user name, or numeric user ID if the user has no name.
%U File's numeric user ID.
%y File's type (like in ls -l), U=unknown type (shouldn't happen)
%Y File's type (like %y), plus follow symlinks: L=loop, N=nonexistent
%Z (SELinux only) file’s security context.

A '%' character followed by any other character is discarded (but the other character is printed).

The %m and %d directives support the # , 0 and + flags, but the other directives do not, even if they print numbers. Numeric directives that do not support these flags include G, U, b, D, k and n. The '-' format flag is supported and changes the alignment of a field from right-justified (which is the default) to left-justified.

See the UNUSUAL FILENAMES section for information about how unusual characters in filenames are handled.

If -depth is not given, true; if the file is a directory, do not descend into it.
If -depth is given, false; no effect.

Exit immediately. No child processes will be left running, but no more paths specified on the command line will be processed. For example, find /tmp/foo /tmp/bar -print -quit will print only /tmp/foo. Any command lines which have been built up with -execdir ... {} + will be invoked before find exits. The exit status may or may not be zero, depending on whether an error has already occurred.

True; list current file in ‘ls -dils’ format on standard output. The block counts are of 1K blocks, unless the environment variable POSIXLY_CORRECT is set, in which case 512-byte blocks are used. See the UNUSUAL FILENAMES section for information about how unusual characters in filenames are handled.

Many of the actions of find result in the printing of data which is under the control of other users. This includes file names, sizes, modification times and so forth. File names are a potential problem since they can contain any character except ’\0’ and ’/’. Unusual characters in file names can do unexpected and often undesirable things to your terminal (for example, changing the settings of your function keys on some terminals). Unusual characters are handled differently by various actions, as described below.

Always print the exact filename, unchanged, even if the output
is going to a terminal.

Unusual characters are always escaped. White space, backslash, and double quote characters are printed using C-style escaping (for example '\f', '\"'). Other unusual characters are printed using an octal escape. Other printable characters (for -ls and -fls these are the characters between octal 041 and 0176) are printed as-is.

If the output is not going to a terminal, it is printed as-is. Otherwise, the result depends on which directive is in use. The directives %D, %F, %g, %G, %H, %Y, and %y expand to values which are not under control of files' owners, and so are printed as is. The directives %a, %b, %c, %d, %i, %k, %m, %M, %n, %s, %t, %u and %U have values which are under the control of files' owners but which cannot be used to send arbitrary data to the terminal, and so these are printed as-is. The directives %f, %h, %l, %p and %P are quoted. This quoting is performed in the same way as for GNU ls. This is not the same quoting mechanism as the one used for -ls and -fls. If you are able to decide what format to use for the output of find then it is normally better to use '\0' as a terminator than to use newline, as file names can contain white space and newline characters.

Quoting is handled in the same way as for -printf and -fprintf. If you are using find in a script or in a situation where the matched files might have arbitrary names, you should consider using -print0 instead of -print.

The -ok and -okdir actions print the current filename as-is. This may change in a future release.

OPERATORS
Listed in order of decreasing precedence:

( expr )
Force precedence.

! expr True if expr is false.

Same as ! expr, but not POSIX compliant.

expr1 expr2
Two expressions in a row are taken to be joined with an implied "and"; expr2 is not evaluated if expr1 is false.

expr1 -a expr2
Same as expr1 expr2.

expr1 -and expr2
Same as expr1 expr2, but not POSIX compliant.

expr1 -o expr2
Or; expr2 is not evaluated if expr1 is true.

expr1 -or expr2
Same as expr1 -o expr2, but not POSIX compliant.

expr1 , expr2
List; both expr1 and expr2 are always evaluated. The value of expr1 is discarded; the value of the list is the value of expr2. The comma operator can be useful for searching for several different types of thing, but traversing the filesystem hierarchy only once. The -fprintf action can be used to list the various matched items into several different output files.